Skip to product information

Leathos Horse Gear Hole Puncher

Leathos Horse Gear Hole Puncher

Buy now & Get 3 FREE Premium Ebooks:

featured_seasonal_and_gifts Quick Fixes for Bridles & Headcollars ($5 Value)

featured_seasonal_and_gifts Stirrup Leathers & Spur Straps ($5 Value)

featured_seasonal_and_gifts The Tack Room Fix-It Handbook ($10 Value)

 

content_cut NO HAMMER, NO SQUEEZE

check_circle CLEAN ROUND HOLES

surgical 6 HOLE SIZES

health_and_safety BUILT TO LAST

verified 30-Day Money Back Guarantee

  • American express payment method American Express
  • Apple pay payment method Apple Pay
  • Google pay payment method Google Pay
  • Paypal payment method PayPal
  • Klarna payment method Klarna
  • Visa payment method Visa
  • Master payment method Mastercard
  • Maestro payment method Maestro

I bought one several months ago. It’s perfect getting to those spots where you can’t use a regular punch and I’ve put it through some pretty thick stuff... very pleased with it

George E.

Mark the hole where the fit needs it. Lay the strap on a cutting mat or a firm board. Screw on the tip that matches the tongue of your buckle or the holes already in the strap, set it on the mark and press straight down. The Spring-Spin-Cut mechanism does the rest: the spring spins the cutter as you press, slicing a clean round hole instead of crushing or tearing one. Doubled or stitched leather takes extra presses, one layer at a time. Then try the tack on your horse and check the fit.

• Leathos Hole Puncher
• Premium Protective Box
• 6 Sizes, Interchangeable Tips
• Leathos Card
• 3 Free Bonus Guides (PDF)

-Will it go through bridle and stirrup leather?
Yes. It punches bridle leather, including a doubled and stitched strap, halter straps and stirrup leathers. Doubled leather takes extra presses. Put the strap on a cutting mat and punch through the layers one at a time.

-Which tip do I use?
The six tips run from 1.5mm to 4mm. Pick the one that matches the tongue of your buckle or the holes already in the strap, and try it on a scrap of the same leather first.

-How is it different from a rotary punch, a hammer punch or pliers?
A rotary punch can break mid-use and leave circle marks on good leather. A punch struck with a mallet is loud and needs a block under the strap. Punch pliers squeeze with everything you have. This tool cuts by pressing: you hold it, set the tip on your mark and press straight down, and a rotating cutting edge slices around the circle as it goes.

-What is it not for?
It is a tool for leather tack. It is not for nylon webbing. It also does not replace tack that fits: buy the right size first, and use this for the one hole the fit still needs between the factory holes.

View full details

30,845+ Happy Customers

  • hp equestrian review 1 slider v3
  • hp equestrian review 2 slider v3
  • hp equestrian review 3 slider v3
  • hp equestrian review 4 slider v3
  • hp equestrian review 5 slider v3
     
     

    Stop Taking Your Tack to the Saddler for One Hole!

     
     

    How the Spring Spin Cut Mechanism Works

    The old fixes are a nail heated on the hob, a punch and a mallet, a squeeze with the pliers, or the drive to the saddler. A rotary punch breaks when you lean on it and leaves circle marks on good leather.

    The Spring-Spin-Cut mechanism replaces all of them. Set the tip on your mark and press down with one hand: the cutter spins as it descends and slices the hole clean, with no hammering and no squeezing. Then it springs back up, ready for the next hole.

    Six Tips, Sized for the Buckles on Your Tack

    Includes 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm and 4mm cutters. Pick the tip that matches the tongue of your buckle or the holes already in the strap. Doubled or stitched leather takes extra presses, so give it a minute and keep the strap flat on the mat.

    hp equestrian toolbox

    Solid Build, Made to Last

    Strong metal, smooth hardwood, and a palm-driven design that doesn’t strain your hand.

    It’s built as a serviceable tool, not a disposable one: the tips sharpen when they dull, and the tool stays in service. Small enough to live in the tack box or the grooming tote, so the fix happens at the barn, before the lesson.

    • hp equestrian usecase halter v3

      Headcollars and Halters

      Taking in a headcollar that sits between sizes, or fitting a new buckle or a nameplate. One hole where the fit needs it.

    • hp equestrian usecase bridle v3

      Bridle Cheekpieces and Nosebands

      The cheekpiece that is one hole too long, the noseband that sits too low however tight you do up the headpiece. Add the hole between the factory ones.

    • hp equestrian usecase stirrup v3

      Stirrup Leathers

      Shorten a child's leathers before the lesson, or take in a pair that has run out of holes. Done at the barn, with no one else needed.

    • hp equestrian usecase spur v3

      Spur Straps, Chaps and Repairs

      A worn strap that needs one clean hole, a spur strap, a pair of chaps. The fix takes a minute and the tool goes back in the tack box.

      Real People. Real Results.

      Here are the benefits our customers mention most after making the switch

      0%

      Said their hands are under way less stress and pain

      0%

      Love how peaceful the work feels without hammering

      0%

      Saw a big improvement in their projects — faster and cleaner

      Smart Waste Channel

      The built-in channel pushes out cut material as the cutter fills, keeping the tip clear as you work.

      Punch the next hole, and the next. The tool keeps up.

      hp equestrian guarantee

      Fix Your Tack at the Barn, or Your Money Back

      Try it on your next bridle, halter or pair of stirrup leathers for 30 days. If it doesn’t punch clean holes exactly where you need them, send it back for a full refund.